Intellinet-network 515566 Net Toner and Probe Kit Manuale Utente Pagina 1

Net toNer aNd Probe Kit usermaNual MODEL 515566 INT-515566-UM-0709-01

10 sPecificatioNsNet Toner• Toner frequency: - High: alternating 500-781 Hz - Low: alternating 446-657 Hz• Talk battery: 9 V into a 600-Ohm ci

SECTION NAME11

INTELLINET NETWORK SOLUTIONS™ offers a complete line of active and passive networking products. Ask your local computer dealer for more information or

3Thank you for purchasing the INTELLINET NETWORK SOLUTIONS™ Net Toner and Probe Kit, Model 515566.With testing leads and modular cables for individua

4 oPeratioNSending/Tracing a Tone1. Set the toggle switch on the Net Toner to the TONE HI-LO position.2. Plug the cable to be checked into the Tone/

5Testing Cable ContinuityNOTE: Before testing for continuity, check line polarity to ensure that the line is not powered.1. Connect the red and back

6 • Red indicates reversed polarity. • Flickering red and green indicates the presence of AC power or a ringing line. • A faint LED indicat

7Adjust the gain control whenever necessary to maintain constant (or regain) audio contact until the test cable is located.Locating conductor break/d

8 Checking low voltage (less than 24 volts DC or AC only) — • NRM LED lighted – The black test lead is connected to negative (–) DC voltage. •

9 toward you.2. Grasp the tip and gently turn it counterclockwise until it separates from the probe body.3. Replace the old tip with a compatibl